|
Please Consult this Chart for a Quick Idea of the Many Products and
Services that are available from
Primary Flow Signal, Inc. All items are further described in
extensive technical literature that is available
for the asking. PFS, Inc. can be your one-stop Flow metering
resource. Please call if you don’t see your
exact application listed. For thorough, knowledgeable assistance with any of your
requirements.
Contact Primary Flow Signal, Inc. or
your local PFS, Inc.Representative.
 |
A Venturi type differential producer for very high accuracy and reliable flow
measurement of liquid and gas line fluids. Produced in Cast or Ductile Iron with 304 or
316 Stainless Steel throat section, this design is typically available in line sizes from
4.0” thru 96.0” with ANSI 125-150# or 250# flanges as standard equipment.
Special throat and casting materialsare available by request as well as various end
treatments.PFS,INC. PROVIDES COMPLETE ENGINEERING, SIZING,
AND DESIGN SER-VICES TO ASSURE EQUIPMENT MEETS OR EXCEEDS YOUR APP-LICATION REQUIREMENTS. |
|
A Venturi type differential producer for very high accuracy and reliable flow
measurement of liquid and gas line fluids. Produced in Fiberglass reinforced polyester
with 304 stainless steel throat and tap sleeves and epoxy coated carbon steel center
flange. Pressure rating is that of the mating flange of the process piping. Special throat
sizing and materials are available by request. PFS,
INC. PROVIDES COMPLETE ENGINEERING, SIZING, AND DESIGN SERVICES TO ASSURE EQUIPMENT MEETS
OR EXCEEDS YOUR APPLICATION REQUIREMENTS. |
|
A Venturi type differential producer for very high accuracy and reliable flow
measurement of liquid or gas line fluids. Made to fit specific require-
ments of the user’s application, any commercially available materials are used to
fabricate. Line sizes from 3/8” to 180.0” are available. PFS, INC. PROVIDES COMPLETE ENGINEERING, SIZING, AND DESIGN SERVICES TO
ASSURE EQUIPMENT MEETS OR EXCEEDS YOUR APPLICATION REQUIREMENTS. |
 |
PFS, Inc. Offers a full line of turbine style flow meters ranging from 0.3 - 3
g.p.m. to 500 - 5,000 g.p.m. The PFS-TM series of turbine meters will work well for clean
liquids such as brine and water, as well as a broad range of line fluids associated with
industrial applications. With standard materials of construction being 316 SS body and 416
SS turbine blades, the integral magnetic pick-up senses revolutions of each blade which
creates pulses directly related to fluid volume passing through the meter. Supplied with a
flow calibrated K-factor. PFS, INC. PROVIDES COMPLETE ENGINEERING,
SIZING, AND DESIGN TO ASSURE ALL EQUIPMENT MEETS OR EXCEEDS YOUR APPLICATION REQUIREMENTS. |
Primary
Flow Signal, Inc. Offers High Quality Equipment with In-Depth Technical
Support for your Flow Measurement Requirements! PFS, Inc. Technical Services is always
ready to assist with any of your application requirements, providing the optimum solution
to your needs. Our extensive archives allow us to help, sometimes even after the original
equipment manufacturer no longer supports his equipment.
Lots of PFS, Inc. equipment is kept instock for rapid delivery
anywhere in the world. |
Municipal and industrial sewer/pollution control systems can be often over run by
torrential precipitation causing sheet in-flows that may result in unauthorized discharges
into public waterways.Similarly sheet in-flows can destroy or disable sub-grade equipment
installations. The PFS StormSeal prevents these by providing
an HDPE barrier installed under each manway cover,
eliminating the unwanted in-flows cost effectively, permanently and reliably. Offered in
virtually all sizes,configurations and shapes prevalent in the field. CALL FOR PRICING AND DELIVERY! |
|
All Mag-Meters require grounding protection in-line, and PFS, Inc. stocks a full
line of stainless steel grounding plates for any make or model Mag-Meter at the lowest
prices for first quality equipment. Whether buying one, or one hundred, CALL PFS, INC. FOR THE LOWEST PRICES AND QUICKEST
DELIVERY! SPECIAL MATERIALS
AND SIZES AVAILABLE ON
REQUEST. |
|
To compliment its extensive line of primary flow elements PFS, INC.
offers secondary equipment ranging from the PFS-HP transmitter
with a minimum 5 year product warranty, through the PFS-FM
FlowMaster consisting of a NEMA 4 enclosure containing transmitter(s), totaliser,
power supply, and surge protector, in a turnkey package. The PFS-IMS
Intelligent Metering System is the State-of-the-Art Pentium based, touch screen
activated flow measurement analysis and control with special PFS software in a Windows 95
platform. The operator can control pump, filter, valve and other typical functions
addressing abroad and operator specified range of control parameters. Full remote
reporting and control capabilities via modem, cell, or radio are available. 
PFS-FM FLOWMASTER INSTALLATIONS
|
PFS-IMS
INTELLIGENT METERING SYSTEM
PFS-HP High Performance Transmitter with PFS 3-Valve Manifold. One of the longest warranties in the busines |
|
